PB65MX4 LEKUO SouthBridge Extend — Product Overview
In a nutshell: Put the motherboard's B650 SouthBridge onto a PCIe card. The front M.2 slots take function modules as needed (10GbE RJ45 / fiber / M.2-to-SATA), and the back takes two NVMe SSDs — swap the function anytime, without swapping the card.
1. What This Product Is For
How many devices a computer can connect comes down to its PCIe lane count. The CPU supplies a limited number of lanes, so motherboard makers have to ration them: M.2 slots usually get only 1–3, and not every board has a 20Gbps front-panel USB-C. Want to install more drives, want 10GbE, want to fill up the front panel — and you run straight into the wall of "no slots, no ports."
PB65MX4's approach: build a B650 SouthBridge chip directly onto the expansion card. A SouthBridge's whole job is "turn one uplink channel into a whole set of downstream ports" — and that job now moves off the motherboard and onto a card:
- Uplink: PCIe 4.0 x4, 64Gbps raw total bandwidth
- Downstream:
- Card front — 2 × M.2 function-module slots (PCIe 3.0 x2), for LEKUO function modules: 10G RJ45 or fiber NIC modules, an M.2-to-SATA module, or other M.2 peripheral modules. Each slot has independent power and signal conditioning to keep modules running reliably, so users can configure the card's functions "like building blocks" — adapting to different scenarios without replacing the whole card.
- Card front — 1 × USB-C (20Gbps), 1 × Type-E (10Gbps)
- Card back — 2 × M.2 NVMe SSD slots (PCIe 4.0 x4)
It is not a card with "hard-wired functions," but a base card: whatever module you plug in is what it becomes.
No Motherboard Bifurcation: Plug In and Go
This is the most fundamental difference between it and cheap PCIe splitter cards.
| Ordinary PCIe splitter card | PB65MX4 | |
|---|---|---|
| Working Principle | Physically cuts one x16 slot into several segments | Carries a real B650 SouthBridge onboard, with its own PCIe switch and USB controller |
| Motherboard Requirement | Must support bifurcation, otherwise it sees only half — or nothing at all | No motherboard bifurcation needed — it appears as a standard PCIe device |
| Can It Output USB? | No, PCIe only | Yes — it also provides 20Gbps USB-C and 10Gbps Type-E |
| Can the Function Be Changed? | No | Yes — just swap the module |
2. Modular Design: Two Front Slots, Functions You Define
The two PCIe 3.0 x2 M.2 slots on the front of the card are purpose-built for LEKUO M.2 function modules. Each slot has independent power and signal conditioning to keep modules running reliably. Whatever you plug in, it becomes:
| Module Inserted | The Card Becomes |
|---|---|
| 10G SFP+ NIC module | 10GbE fiber NIC, can run dual fiber ports |
| 10G RJ45 NIC module | 10GbE copper NIC, can run dual RJ45 ports |
| Mixed copper + fiber | One RJ45 port + one fiber port, freely combined to match on-site cabling |
| M.2-to-SATA module | Turns the PCIe slot into 4–6 SATA ports — ideal for NAS / DAS upgrades |
| Other M.2 peripheral modules | Custom functions on demand |
The two slots can be mixed. For example, a 10GbE RJ45 module on one side and an M.2-to-SATA module on the other, with two NVMe SSDs on the back — 10GbE networking, multi-drive storage, and high-speed cache, all handled by one machine.
- Configure on demand — start with 10GbE and buy only the NIC module; when you later need more drive bays, add a SATA module instead of buying a new card
- Upgradeable long term — when LEKUO releases new modules, you plug them straight in and the base card never needs replacing, which lowers long-term maintenance costs
3. Front and Rear Slots: Different Purposes, Not Interchangeable
| Position | Slots | Lane Specification | Supported Lengths | Purpose |
|---|---|---|---|---|
| Card front | M_B / M_D | PCIe 3.0 x2 | 2230 / 2242 / 2260 / 2280 | Function-module slots (10GbE NIC / M.2-to-SATA / other modules); standard SSDs also supported |
| Card back | M_A / M_C | PCIe 4.0 x4 | 2280 / 22110 | NVMe SSD slots, ideal for boot drives and cache drives |
The two sides have different lane specifications, so choose the slot that matches your needs. Install high-performance SSDs on the back.
4. One Thing That Must Be Stated Clearly: The Bandwidth Is Shared
All downstream devices — function modules, SSDs, and USB ports — share this single PCIe 4.0 x4 uplink (64Gbps raw bandwidth).
- A single SSD doing sequential reads and writes can approach its own rated performance
- When multiple devices run at full speed at the same time, they share this uplink (the USB side supports dynamic allocation and balances automatically when used simultaneously)
This is not a flaw of this card, but a characteristic common to every SouthBridge expansion design — a SouthBridge is, by nature, lane multiplexing. Put high-performance SSDs on the back and bulk drives and modules on the front, and you make far better use of that uplink.
5. Specifications at a Glance
| Item | Specification |
|---|---|
| Model | PB65MX4 |
| Product Name | LEKUO SouthBridge Extended |
| Core Chipset | B650 SouthBridge chipset |
| Uplink | PCIe 4.0 x4, 64Gbps (backward compatible with Gen3 / Gen2 / Gen1) |
| Front Slots | 2 × M.2 (M_B / M_D), PCIe 3.0 x2, function-module slots, 2230 / 2242 / 2260 / 2280 |
| Rear Slots | 2 × M.2 (M_A / M_C), PCIe 4.0 x4, NVMe SSD slots, 2280 / 22110 |
| USB | 1 × USB-C (20Gbps) + 1 × Type-E (10Gbps) |
| Power | Onboard 6-pin (be sure to connect the 6-pin power cable when using high-power USB devices; the 6-pin connector only addresses the power delivery ceiling — it does not change the 64Gbps shared bandwidth) |
| OS Support | Windows / Linux / macOS |
6. In One Sentence
Need networking? Plug in a NIC module (RJ45 or fiber, your pick). Need drive bays? Plug in an M.2-to-SATA module. Need speed? Add NVMe on the back — no motherboard bifurcation, plug in and go, functions that change as your needs do.