RTL8127 Finally Supports Mac: Third-Party Open-Source Driver Released
In a nutshell: This 1.79W 10GbE chip previously could not be used on a Mac. On September 14, 2026, the open-source project RTL812xLucy filled that gap with a macOS driver — third-party, open source, signed and notarized. Project page: https://github.com/stefb69/RTL812xLucy.
What Happened
On September 14, 2026, the open-source project RTL812xLucy released v1.1.2-rtl8127.beta2, adding 10GbE support for Realtek RTL8127 / RTL8127ATF on Apple Silicon Macs.

One clarification first: the Mac itself is not short of 10GbE — Apple offers a built-in 10GbE option, and Thunderbolt docks can deliver it too; both simply sit in a different price bracket. What was missing is this cheap, low-power Realtek path. RTL8127 has long worked on Windows and Linux — only macOS had no driver and no official port. DTB3F11 is built on exactly this chip.
The point is not that "a driver now exists," but that this driver installs cleanly:
- It is a DriverKit extension, signed and notarized by Apple — not an unsigned kext that the system has to be coaxed into loading
- No Recovery Mode, no enabling "Reduced Security", no running csrutil
- Install a single .pkg, approve the extension once in System Settings, plug in the card and it works

What This Version Can Do
Version v1.1.2-rtl8127.beta2 (installer 0.2.27). Test setup: M5 Mac + macOS 26.6, Thunderbolt enclosure, DAC to a 10GbE switch, Linux on the far end:
| Test | MTU 1500 | MTU 9000 |
|---|---|---|
| TX, 1 stream | 9.40 Gbit/s | 9.63 Gbit/s |
| RX, 1 stream | 9.38 Gbit/s | 9.89 Gbit/s |
| TX, 4 streams | 9.22 Gbit/s | 9.65 Gbit/s |
| RX, 4 streams | 9.39 Gbit/s | 9.89 Gbit/s |
| TX, 8 streams | 4.5 Gbit/s | 9.71 Gbit/s |
| RX, 8 streams | 9.39 Gbit/s | 9.77 Gbit/s |
Single-stream throughput is about 9.4–9.9 Gbit/s — roughly 94%–99% of 10GbE line rate. With jumbo frames enabled, even 8 concurrent streams reach 9.7 Gbit/s.
Also supported: DHCP, IPv4/IPv6, Bonjour multicast discovery, TCP segmentation offload (IPv4/IPv6), checksum offload, and jumbo frames (up to MTU 9000).
- The driver is still in beta, maintained by an independent developer. It is not officially provided by Apple, Realtek, or LEKUO, and it is free and open source
- At MTU 1500, 8 or more concurrent TCP streams top out at about 4.5 Gbit/s (per-packet overhead on the DriverKit path). At MTU 9000 this disappears
- No Wake-on-LAN (WoL) under macOS. The card itself supports it, and it works under Windows / Linux
Who Benefits
Mac users who want to use RTL8127 — the appeal of this chip is that it is cheap, draws 1.79W, and is fanless, but Mac users previously could not use it at all. Now you can plug into Thunderbolt and get 10GbE shared storage, and being fanless it will not add a noise source to an edit bay or a mixing room.
NAS users — with the Mac as client and the NAS as server, this is the last piece of the puzzle. SFP+ over direct-attach DAC: short reach, low cost, low latency.
Small studios — one card covers Windows, Linux, and macOS, so spares and cabling stay standardized.
Network engineers and developers — a USB4 10GbE port you can carry with you, for link testing, packet capture, and reproducing a customer's topology without opening a chassis.
Product: LEKUO DTB3F11
| Item | DTB3F11 | DTB3F22 |
|---|---|---|
| Controller Chip | Realtek RTL8127ATF | Realtek RTL8127ATF |
| Host Interface | USB4 40Gbps (Thunderbolt 3 / 4 / 5 compatible) | USB4 40Gbps (Thunderbolt 3 / 4 / 5 compatible, supports USB4/Thunderbolt device expansion) |
| Network Interface | 1 × SFP+ Fiber Port | 2 × SFP+ Fiber Ports |
| Supported Speeds | 10GBASE-R / 1000BASE-X | 10GBASE-R / 1000BASE-X |
| Power Consumption | 1.79W at 10GBASE-R | 2.5W at 10GBASE-R | 7.4W for the entire card |
| Cooling | Unibody all-aluminum enclosure, fanless | Aluminum enclosure |
| Dimensions / Weight | 99.5 × 48 × 29 mm | 115g | 152 × 95 × 29 mm | 355g |
| OS (Official) | Windows 10/11, Linux | Windows 10/11, Linux |
| macOS | Supported via open-source driver | Same chip; the same driver applies |